13W MAX High Luminosity 90cm Glass LED Tube T8 4000K
VAT included
The MAX HIGH LUMINOSITY LED TUBE T8 90cm SMD 2835 EPISTAR 150 Lm/W and power of 13W represents an excellent and economical solution for the replacement of T8 fluorescent tubes. Its direct connection to the mains supply allows to eliminate the remaining consumption of the ballasts and ballasts, by allowing a longer lifespan, lower maintenance requirements, a fast ignition and a flicker-free effect. Includes LED starter.
This T8 tube has a single-end connection, which is screen printed. To optimize energy consumption, the primer must be replaced and the ballast of the old fluorescent tubes eliminated. It has 150Lm/W Epistar 2835 SMD Diode and a high light transmission glass coating that allows for uniform distribution. Angle of 300 º.
It has a power factor greater than 0.90. Its operation is 175-265V and has an CRI higher than 80%. Opal cover that does not produce glare. It also has short-circuit protection and overheating.
Achieve greater savings, avoid flickering light in the lighting of the luminaire and thus achieve instant ignition with this LED tube.
| Rated Power : | 13W |
| Nominal Voltage: | 175-265V |
| Colour: | 4000K |
| CRI - Chromatic Rendiment Index: | 80 |
| Construction Material: | Glass+PC |
| Luminosity-Lm: | 1690 Lm |
| Number & Type of LEDs: | Epistar SMD 2835 |
| Beam Angle (º): | 300º |
| Luminous diodo LED (Lm/W): | 150Lm/W |
| Luminous Efficiency (Lm/W): | 130Lm/W |
| Base: | T8 |
| Certifications: | CE - ROHS |
| IP : | IP20 |
| Diode Life Expectancy (H): | 30.000 |
| Dimensions (mm): | 900 |
| Power Factor (PF): | 0.95 |
| Frequency (Hz): | 50/60Hz |
| Temperature Range (ºC): | -20°C ~ +55°C |
| On/Off Cycles: | 100.000 |
| Starting Time (s): | 0,2s |
| Other Information: | Connection to one end |
| Energy Rating (2021-UE-2019/2015): | A++ |